How to Connect xTool D1 Pro to Wi-Fi
Spread the love

Connecting the xTool D1 Pro laser engraver to your Wi-Fi network allows you to control it wirelessly from your computer. This gives you more flexibility and convenience when using the laser engraver. Follow these simple steps to get your D1 Pro hooked up to Wi-Fi in no time.

What You Need

  • xTool D1 Pro laser engraver
  • Computer with XCS software installed
  • Wi-Fi network name and password

Step 1: Connect xTool D1 Pro to Computer

How To Cut Plywood with xTool D1 Pro 20-watt Laser Cutter

Use the included USB cable to connect your xTool D1 Pro to your computer. This allows the two devices to communicate.

Step 2: Open XCS Software

Launch the XCS software on your computer. This is the official software for controlling xTool laser engravers.

Step 3: Click “Device” Tab

In the XCS software, click on the “Device” tab. This is where you will manage your connected devices.

Step 4: Click Add Device Button

Click the “+” button to add a new device to the XCS software.

Step 5: Select xTool D1 Pro

From the list of devices, select “xTool D1 Pro” since this is the model you are connecting.

Step 6: Click Next

After selecting xTool D1 Pro, click “Next” to proceed.

Step 7: Select Wi-Fi Network

Unlock Your Creativity with Xtool D1 Pro 20W Tumbler Settings

XCS will now display a list of available Wi-Fi networks. Select the network you want to connect your D1 Pro to.

Step 8: Enter Wi-Fi Password

Type in the password for your selected Wi-Fi network. The password must only contain English letters and numbers.

Step 9: Click Connect

Finally, click the “Connect” button. The D1 Pro will now join the Wi-Fi network.

Also read:
What is the XTool M1? Exploring the Features and Functions!
Xtool Vs Glowforge: Finding Best Ir Laser engraver Machine
How To Download Xtool D1 Pro Laser Engraver Software

Step 10: Disconnect USB Cable

Once connected via Wi-Fi, you can disconnect the USB cable between the xTool D1 Pro and your computer. Your laser engraver can now be controlled wirelessly.

Connecting your D1 Pro to Wi-Fi is quick and easy following these steps. This allows for greater flexibility and convenience when using this powerful laser engraving machine. Be sure to select a secure 2.4GHz Wi-Fi network and enter the correct password. With just a few clicks in the XCS software, you’ll be controlling your xTool engraver wirelessly in no time.

One thought on “How to Connect xTool D1 Pro to Wi-Fi”

Leave a Reply

Your email address will not be published. Required fields are marked *

How Fast is the xTool D1 Pro 20W Laser Engraver? XTool P2 vs Glowforge: Which Laser Cutter Is Right For You?