A Step By Step XTOOL D1 Pro 10W Assembly
Spread the love

Introduction

The XTOOL D1 Pro 10W is an excellent entry-level laser engraver that can provide both hobbyists and small business owners with an affordable and reliable machine. With its sturdy aluminum frame, 10W laser diode, and generous 16″x16″ work area, the D1 Pro 10W is capable of engraving and cutting a wide variety of materials.

In this comprehensive guide, we’ll walk through the full assembly process for the XTOOL D1 Pro 10W step-by-step. We’ll also cover installing the necessary software on both Windows and Mac operating systems. Finally, we’ll create a simple first project to get up and running with your new laser engraver.

Unboxing and Parts Overview

How To Set Up Xtool D1 Pro 40w Laser Engraver 2023

When unboxing your XTOOL D1 Pro 10W, you’ll find the major components neatly packed with the majority of pieces already pre-assembled for quick setup:

  • Laser engraving module – Contains the 10W laser diode, adjustable mount, and wiring.
  • X-gantry – The horizontal beam that allows the laser module to move left and right.
  • Y-axis frame – The vertical frame piece with integrated Y-axis stepper motor.
  • X-axis rail – Steel shaft and rail system for X-axis movement.
  • Controller box – Houses the control board, laser driver, power supply, and ports.
  • Assorted hardware – Screws, corner braces, zip ties, hex wrenches.
  • Cables – Power, USB, and wiring harnesses.

Along with the main components, you’ll also find the user manual, startup guide, and other accessories like the exhaust fan and safety glasses. Be sure not to discard anything before carefully checking that you have all the necessary parts.

XTOOL D1 Pro 10W Assembly Instructions

A Step By Step XTOOL D1 Pro 10W Assembly

Constructing the frame of the XTOOL D1 Pro 10W is straightforward thanks to the pre-assembled components. The basic steps are:

  1. Attach the Y-axis frame uprights to the base using corner braces.
  2. Install the X-axis rail and secure it on both ends.
  3. Mount the X-gantry atop the Y-axis frame and fasten in place.
  4. Install the laser engraving module into the X-gantry dovetail slot.
  5. Connect all wiring harnesses and secure with zip ties.

With the mechanical assembly complete, we can move on to downloading, installing and setting up the software.

XTOOL D1 Pro 10W Assemble PDF Download

Downloading Software on Windows

How To Download Xtool D1 Pro Laser Engraver Software

To download the required software on a Windows PC:

Creative Space

  1. Go to https://www.xtool.com/pages/software
  2. Under “Download” click the link to download the driver installer.
  3. Save the .exe file to your computer.

LaserGRBL

  1. Go to lasergrbl.com/download/
  2. Click the link to download the latest Windows installer version.
  3. Save the .exe installer file.

LightBurn

  1. Go to lightburnsoftware.com
  2. Click “Download” and choose the Windows version.
  3. Checkout to purchase and download LightBurn.

Once downloaded, double click each .exe file to launch the installers.

Software Installation on Windows

To use your XTOOL laser engraver on a Windows PC, you’ll need to install the following:

Creative Space

The XTOOL D1 Pro uses the CH340 USB serial chipset for connectivity. so you must install the CH340 driver before the PC can recognize the laser. Download and run the CH340 driver installer executable.

LaserGRBL Software

While the XTOOL D1 Pro 10W laser comes with its own LaserBox software, most users prefer using the more full-featured LaserGRBL. Download and install the latest version of LaserGRBL.

LightBurn (Optional)

For even more advanced control and easier workflow, you can optionally install LightBurn. LightBurn does have a licensing fee, but provides a very polished experience.

With the driver and software installed, you can connect the XTOOL to your PC via the included USB cable and power it on. The laser should now be recognized and controlled through the LaserGRBL or LightBurn programs.

Downloading Software on Mac

How To Download Xtool D1 Pro Laser Engraver Software

Here is how to download the required software on a Mac:

Creative Space

  1. Go to https://www.xtool.com/pages/software
  2. Under “Download” click the link to download the driver installer.
  3. Double click to install.

LightBurn

  1. Go to lightburnsoftware.com
  2. Click “Download” and choose the Mac version.
  3. Checkout to purchase and download LightBurn.

After downloading the .zip driver file and LightBurn installer, double click to open and install each program.

The software can now be launched on either operating system to control your XTOOL laser engraver.

Software Installation on Mac

Getting an XTOOL laser working with a Mac takes just a couple quick steps:

Creative Space

As with Windows, you’ll need the CH340 driver for communication over USB. Download and install the CH340 Mac driver package.

LightBurn

For Mac, LightBurn is the recommended software for controlling the XTOOL laser. Download and install LightBurn, then import the configuration file for the XTOOL D1 Pro 10W.

Connect your laser to your Mac via USB, power it on, and open LightBurn. The laser engraver will be automatically detected and ready for use within LightBurn. The software makes it easy to quickly begin engraving projects.

First Engraving Project

For a quick first project to get up and running with your newly assembled XTOOL D1 Pro 10w laser engraver, let’s engrave a simple text design onto a piece of wood.

Step 1: Design

Open up either LaserGRBL or LightBurn, and use the text tool to type your desired text. For this example, we’ll use the word “Hello” in a bold font. Size and position the text how you like on the virtual workspace.

Step 2: Configure Settings

Check that the cut settings match your material. For wood, a good starting point is 1500mm/min speed at 70% power in fill mode. Tweak settings as needed for your material.

Step 3: Focus & Frame

Use the manual focus gauge on the laser head to set the proper height from the material surface. Then use the framing function to ensure your design is properly positioned.

Step 4: Run Job

Put on your laser safety goggles, hit start, and watch your first laser engraving come to life!

Step 5: Tips & Tricks

Here are some useful tips for continuing your learning:

  • Experiment with different materials and settings.
  • Add multiple colors and stop points for sequential engraving.
  • Check out built-in design tools like stamps and transformations.
  • Utilize layer alignment and orientation functions for complex jobs.
  • Join user forums and groups to learn from fellow laser enthusiasts.
Also read:
How To Set Up Xtool D1 Pro 40w Laser Engraver 2023
How to Connect xTool D1 Pro to Wi-Fi
What is the XTool M1? Exploring the Features and Functions!

Summary

Assembling the XTOOL D1 Pro 10W laser engraver is straightforward with the detailed instructions. The machine can be paired with either LaserGRBL or LightBurn software for intuitive control. With your new laser setup complete, you can now begin exploring all the exciting engraving and cutting projects possible with this versatile machine. Our simple first project example gives just a small taste of the capabilities. We hope you enjoy getting creative and taking your new laser skills to the next level!

How strong is a XTOOL D1 Pro 10W laser?

The XTOOL D1 Pro 10W laser engraver has a 10 watt laser diode, making it strong enough to engrave or cut through materials like wood, acrylic, leather, and some plastics up to about 1/8 inch thickness. It’s an excellent laser for most hobby engraving and cutting needs.

How thick will XTOOL D1 Pro 10W laser cut?

The XTOOL D1 Pro 10W laser engraver can reliably cut through materials up to around 1/8 inch thickness, including wood, acrylic, leather, and some plastics. For thicker materials, the laser can typically engrave but not cut all the way through.

What is the difference between XTOOL D1 Pro 10W and 20W?

The main difference between the XTOOL D1 Pro 10W and 20W laser engravers is the laser power. The 10W version has a single 10 watt laser diode, while the 20W version has dual 10 watt diodes for double the power at 20 watts. This allows the 20W model to cut faster and deeper through materials up to about 1/4 inch thickness. The 20W laser is better for users needing more power, while the 10W strikes a good balance of power and price.

What is the difference between xTool D1 5W and 10W?

The key difference between the XTOOL D1 laser engravers with 5W and 10W lasers is the laser power and cutting/engraving speed. The 5W version has a single 5 watt laser diode, while the XTOOL D1 Pro 10W has dual 5 watt diodes combined for 10 watts of power. The higher 10W laser can cut through materials faster and deeper than the 5W version. The 10W model is recommended for most users, with the 5W being more economical for very light duty engraving.

How long does a 10W diode laser last?

A standard XTOOL D1 Pro 10W laser diode used in hobby laser engravers and cutters will typically last around 2,000-5,000 hours with proper care and maintenance. Following manufacturer guidelines for usage will help maximize the diode laser’s lifespan.

4 thought on “A Step By Step XTOOL D1 Pro 10W Assembly”
  1. […] The D1 Pro comes partially assembled. All you need to do is securely attach the gantry, tighten the belts, connect the laser module and wiring harnesses, and mount the laser tube. The included user manual provides detailed steps. The full assembly process takes around 20-30 minutes. […]

Leave a Reply

Your email address will not be published. Required fields are marked *

How Fast is the xTool D1 Pro 20W Laser Engraver? XTool P2 vs Glowforge: Which Laser Cutter Is Right For You?